Midway Corporation

Request a Quote

FEELER GAGES, ASSORTMENTS & SETS

Feeler gages are used to measure gap widths and are mostly used in engineering to measure the clearance between two parts.

 

They consist of a number of small lengths of steel of different thicknesses with measurements marked on each piece. They are flexible enough that, even if they are all on the same hinge, several can be stacked together to gage intermediate values. It is common to have two sets for imperial units (typically measured in thousandths of an inch) and metric (typically measured in hundredths of a millimetre) measurements.

 

Steel Gages are polished. Brass gages are corrosion resistant. 302/304 stainless steel gages are more corrosion resistant than brass and steel.

 

316 stainless steel has the best corrosion resistance.

Ready-to-Use Feeler Gages

Brass
Feeler Gages
12"L X 1/2"W

  • 0.001"
  • 0.002"
  • 0.003"
  • 0.004"
  • 0.005"
  • 0.006"
  • 0.007"
  • 0.008"
  • 0.009"
  • 0.01"
  • 0.015"
  • 0.02"
  • 0.025"
  • 0.032"

302/304 Stainless Steel
Feeler Gages
12"L X 1/2"W

  • 0.0005"
  • 0.001"
  • 0.0015"
  • 0.002"
  • 0.0025"
  • 0.003"
  • 0.004"
  • 0.005"
  • 0.006"
  • 0.007"
  • 0.008"
  • 0.009"
  • 0.01"
  • 0.012"
  • 0.015"
  • 0.016"
  • 0.018"
  • 0.02"
  • 0.025"
  • 0.031"
  • 0.04mm
  • 0.05mm
  • 0.06mm
  • 0.07mm
  • 0.08mm
  • 0.09mm
  • 0.1mm
  • 0.15mm
  • 0.2mm
  • 0.25mm
  • 0.3mm
  • 0.4mm
  • 0.45mm
  • 0.5mm
  • 0.6mm
  • 0.8mm

316 Stainless Steel
Feeler Gages
12"L X 1/2"W

  • 0.002"
  • 0.003"
  • 0.004"
  • 0.005"
  • 0.01"
  • 0.012"
  • 0.015"
  • 0.02"
  • 0.03"

Steel
Feeler Gages
12"L X 1/2"W

  • 0.001"
  • 0.0015"
  • 0.002"
  • 0.0025"
  • 0.003"
  • 0.004"
  • 0.005"
  • 0.006"
  • 0.007"
  • 0.008"
  • 0.009"
  • 0.01"
  • 0.011"
  • 0.012"
  • 0.013"
  • 0.014"
  • 0.015"
  • 0.016"
  • 0.017"
  • 0.018"
  • 0.019"
  • 0.02"
  • 0.021"
  • 0.022"
  • 0.023"
  • 0.024"
  • 0.025"
  • 0.026"
  • 0.027"
  • 0.028"
  • 0.029"
  • 0.03"
  • 0.031"
  • 0.032"
  • 0.033"
  • 0.034"
  • 0.035"
  • 0.04"
  • 0.045"
  • 0.046"
  • 0.05"
  • 0.06"
  • 0.1"
  • 0.125"
  • 0.04mm
  • 0.05mm
  • 0.06"
  • 0.1"
  • 0.125"
  • 0.04mm
  • 0.05mm
  • 0.06mm
  • 0.07mm
  • 0.08mm
  • 0.09mm
  • 0.1mm
  • 0.15mm
  • 0.2mm
  • 0.25mm
  • 0.3mm
  • 0.35mm
  • 0.4mm
  • 0.5mm
  • 0.55mm
  • 0.6mm
  • 0.65mm
  • 0.7mm
  • 0.75mm
  • 0.8mm
  • 0.85mm
  • 0.9mm
  • 0.95mm
  • 1mm

Feeler Gage Rolls - Cut to Size

Brass
Feeler Gages
10ft X 1/2"W

  • 0.001"
  • 0.002"
  • 0.003"
  • 0.004"
  • 0.005"
  • 0.006"
  • 0.007"
  • 0.008"
  • 0.009"
  • 0.01"
  • 0.015"
  • 0.02"
  • 0.025"
  • 0.032"

302/304 Stainless Steel
Feeler Gages
10ft X 1/2"W

  • 0.0005"
  • 0.001"
  • 0.0015"
  • 0.002"
  • 0.0025"
  • 0.003"
  • 0.004"
  • 0.005"
  • 0.006"
  • 0.007"
  • 0.008"
  • 0.009"
  • 0.01"
  • 0.012"
  • 0.015"
  • 0.016"
  • 0.018"
  • 0.02"
  • 0.025"
  • 0.031"
  • 0.04mm
  • 0.05mm
  • 0.06mm
  • 0.07mm
  • 0.08mm
  • 0.09mm
  • 0.1mm
  • 0.15mm
  • 0.2mm
  • 0.25mm
  • 0.3mm
  • 0.4mm
  • 0.45mm
  • 0.5mm
  • 0.6mm
  • 0.8mm

316 Stainless Steel
Feeler Gages
12"L X 1/2"W

  • 0.002"
  • 0.003"
  • 0.004"
  • 0.005"
  • 0.01"
  • 0.012"
  • 0.015"
  • 0.02"
  • 0.03"

Steel
Feeler Gages
12"L X 1/2"W

25 ft

  • 0.001"
  • 0.0015"
  • 0.002"
  • 0.0025"
  • 0.003"
  • 0.004"
  • 0.005"
  • 0.006"
  • 0.007"
  • 0.008"
  • 0.009"
  • 0.01"
  • 0.011"
  • 0.012"
  • 0.013"
  • 0.014"
  • 0.015"
  • 0.016"

20 ft

  • 0.017"
  • 0.018"
  • 0.019"
  • 0.02"
  • 0.021"
  • 0.022"
  • 0.023"
  • 0.024"
  • 0.025"
  • 0.026"
  • 0.027"
  • 0.028"
  • 0.029"
  • 0.03"
  • 0.031"
  • 0.032"
  • 0.033"
  • 0.034"
  • 0.035"

15 ft

  • 0.04"

10 ft

  • 0.04mm
  • 0.05mm
  • 0.06mm
  • 0.07mm
  • 0.08mm
  • 0.09mm
  • 0.1mm
  • 0.15mm
  • 0.2mm
  • 0.25mm
  • 0.3mm
  • 0.35mm
  • 0.4mm
  • 0.5mm
  • 0.55mm
  • 0.6mm
  • 0.65mm
  • 0.7mm
  • 0.75mm
  • 0.8mm
  • 0.85mm
  • 0.9mm
  • 0.95mm
  • 1mm

Feeler Gage Assortments

Steel Feeler Gage
Assortment
20pc 6"L x 1/2"W

  • 0.001"
  • 0.0015"
  • 0.002" to 0.01" (0.001" increments)
  • 0.012"
  • 0.014"
  • 0.015"
  • 0.016"
  • 0.018"
  • 0.02"
  • 0.022"
  • 0.024"
  • 0.025"

Steel Feeler Gage
Assortment
32pc 1/2"L x 1/2"W

  • 0.001"
  • 0.0015"
  • 0.002"
  • 0.0025"
  • 0.003" to 0.03" (0.001" increments)

Steel Feeler Gage
Assortment
48pc 1/2"L x 1/2"W

  • 0.001"
  • 0.0015"
  • 0.002"
  • 0.0025"
  • 0.003" to 0.01" (0.001" increments)
  • 0.015"
  • 0.02
  • 0.025"
  • 0.03"

302/304 Stainless Steel
Feeler Gages Assortment
20pc 6"L x 1/2"W

  • 0.0005"
  • 0.001"
  • 0.0015"
  • 0.002"
  • 0.0025"
  • 0.003" to 0.01" (0.001" increments)
  • 0.012"
  • 0.015"
  • 0.016
  • 0.018"
  • 0.02"
  • 0.025"
  • 0.031"

302/304 Stainless Steel
Feeler Gages Assortment
20pc 6"L x 1/2"W

  • 0.0005"
  • 0.001"
  • 0.0015"
  • 0.002"
  • 0.0025"
  • 0.003" to 0.01" (0.001" increments)
  • 0.012"
  • 0.015"
  • 0.016
  • 0.018"
  • 0.02"
  • 0.025"
  • 0.031"

Feeler Gage Sets

Starrett Feeler Gage Sets

  • 8 Leaf 1/2"L x 1/2"W, Closed 12-7/16"L X 1/2"W: 0.002", 0.003, 0.004", 0.005", 0.006", 0.008", 0.01", 0.015"
  •  9 Leaf 3"L x 1/2"W, Closed 3-5/8"L X 1/2"W: 0.0015", 0.002, 0.003", 0.004", 0.006", 0.008", 0.01", 0.012", 0.015"
  •  13 Leaf 4-1/2"L x 1/2"W, Closed 4-15/16"L X 1/2"W: 0.0015", 0.002", 0.003, 0.004", 0.005", 0.006", 0.008", 0.01", 0.02", 0.03", 0.04", 0.075", 0.1", 0.2"
  •  13 Leaf 4-1/2"L x 1/2"W, Closed 4-15/16"L X 1/2"W: 0.04mm, 0.05mm, 0.06mm, 0.07mm, 0.08mm, 0.10mm, 0.15mm, 0.20mm, 0.30mm, 1.0mm, 2.0mm, 3.0mm, 5.0mm
  •  26 Leaf 3"L x 1/2"W, Closed 3-7/16"L X 1/2"W: 0.0015", 0.002", 0.0025", 0.003" to 0.025" (0.001" increments)